# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.

# CSP Warnings:
# LOCALIZATION NOTE (CSPViolation):
# %1$S is the reason why the resource has not been loaded.
CSPViolation = 页面设置阻止读取一项资源：%1$S
# LOCALIZATION NOTE (CSPViolationWithURI):
# %1$S is the directive that has been violated.
# %2$S is the URI of the resource which violated the directive.
CSPViolationWithURI = 页面设置阻止读取位于 %2$S 的一项资源("%1$S")。
# LOCALIZATION NOTE (CSPROViolation):
# %1$S is the reason why the resource has not been loaded.
CSPROViolation = 发生一次 report-only CSP 策略违反 ("%1$S")。此行为已被允许，并且一份 CSP 报告已被发送。
# LOCALIZATION NOTE (CSPROViolationWithURI):
# %1$S is the directive that has been violated.
# %2$S is the URI of the resource which violated the directive.
CSPROViolationWithURI = 该页面设置了观测在 %2$S ("%1$S") 的资源加载。一个 CSP 报告已开始发送。

# CSP Warnings:

# LOCALIZATION NOTE (CSPInlineStyleViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. style-src-elem)
CSPInlineStyleViolation = 由于违反了下列指令：“%1$S”，此页面的内联样式（%2$S）无法应用
# LOCALIZATION NOTE (CSPROInlineStyleViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. style-src-elem)
CSPROInlineStyleViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面的内联样式（%2$S）无法应用
# LOCALIZATION NOTE (CSPInlineScriptViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src-elem)
CSPInlineScriptViolation = 由于违反了下列指令：“%1$S”，此页面的内联脚本（%2$S）无法执行
# LOCALIZATION NOTE (CSPROInlineScriptViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src-elem)
CSPROInlineScriptViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面的内联脚本（%2$S）无法执行
# LOCALIZATION NOTE (CSPEventHandlerScriptViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src-attr)
CSPEventHandlerScriptViolation = 由于违反了下列指令：“%1$S”，此页面的事件句柄（%2$S）无法执行
# LOCALIZATION NOTE (CSPROEventHandlerScriptViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src-attr)
CSPROEventHandlerScriptViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面的事件句柄（%2$S）无法执行
# LOCALIZATION NOTE (CSPEvalScriptViolation):
# Don't translate/change "'unsafe-eval'", including the single quote.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src)
CSPEvalScriptViolation = 由于违反了下列指令：“%1$S”（缺少”unsafe-eval“），此页面的 JavaScript eval（%2$S）无法执行
# LOCALIZATION NOTE (CSPROEvalScriptViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# Don't translate/change "'unsafe-eval'", including the single quote.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src)
CSPROEvalScriptViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”（缺少”unsafe-eval“），此页面的 JavaScript eval（%2$S）无法执行
# LOCALIZATION NOTE (CSPWasmEvalScriptViolation):
# WebAssembly is a feature name.
# Don't translate/change "'wasm-unsafe-eval'" or "'unsafe-eval'", including the single quote.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src)
CSPWasmEvalScriptViolation = 由于违反了下列指令：“%1$S”（缺少”wasm-unsafe-eval“或”unsafe-eval“），此页面的 WebAssembly（%2$S）无法执行
# LOCALIZATION NOTE (CSPROWasmEvalScriptViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# WebAssembly is a feature name.
# Don't translate/change "'wasm-unsafe-eval'" or "'unsafe-eval'", including the single quote.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the type of directive used by the resource (e.g. script-src)
CSPROWasmEvalScriptViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”（缺少”wasm-unsafe-eval“或”unsafe-eval“），此页面的 WebAssembly（%2$S）无法执行
# LOCALIZATION NOTE (CSPStyleViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. style-src)
CSPStyleViolation = 由于违反了下列指令：“%1$S”，此页面来自 %2$S 的样式（%3$S）无法应用
# LOCALIZATION NOTE (CSPROStyleViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. style-src)
CSPROStyleViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面来自 %2$S 的样式（%3$S）无法应用
# LOCALIZATION NOTE (CSPScriptViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. script-src-elem)
CSPScriptViolation = 由于违反了下列指令：“%1$S”，此页面来自 %2$S 的脚本（%3$S）无法执行
# LOCALIZATION NOTE (CSPROScriptViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. script-src-elem)
CSPROScriptViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面来自 %2$S 的脚本（%3$S）无法执行
# LOCALIZATION NOTE (CSPWorkerViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. worker-src)
CSPWorkerViolation = 由于违反了下列指令：“%1$S”，此页面来自 %2$S 的 worker 脚本（%3$S）无法执行
# LOCALIZATION NOTE (CSPROWorkerViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. worker-src)
CSPROWorkerViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面来自 %2$S 的 worker 脚本（%3$S）无法执行
# LOCALIZATION NOTE (CSPGenericViolation):
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. image-src)
CSPGenericViolation = 由于违反了下列指令：“%1$S”，此页面位于 %2$S 的资源（%3$S）无法加载
# LOCALIZATION NOTE (CSPROGenericViolation):
# Don't translate "Report-Only" as it's part of the name Content-Security-Policy-Report-Only.
# %1$S is the entire directive that has been violated. (e.g. "default-src 'none'")
# %2$S is the URI of the resource which violated the directive.
# %3$S is the type of directive used by the resource (e.g. image-src)
CSPROGenericViolation = （“仅作上报”策略）由于违反了下列指令：“%1$S”，此页面位于 %2$S 的资源（%3$S）无法加载

# LOCALIZATION NOTE (triedToSendReport):
# %1$S is the URI we attempted to send a report to.
triedToSendReport = 试图发送报告到无效的 URI：“%1$S”
tooManyReports = 已阻止在短时间内发送过多 CSP 报告。
# LOCALIZATION NOTE (couldNotParseReportURI):
# %1$S is the report URI that could not be parsed
couldNotParseReportURI = 无法解析报告的 URI：%1$S
# LOCALIZATION NOTE (couldNotProcessUnknownDirective):
# %1$S is the unknown directive
couldNotProcessUnknownDirective = 不能处理未知的指令“%1$S”
# LOCALIZATION NOTE (ignoringUnknownOption):
# %1$S is the option that could not be understood
ignoringUnknownOption = 忽略了未知选项 %1$S
# LOCALIZATION NOTE (ignoringDuplicateSrc):
# %1$S defines the duplicate src
ignoringDuplicateSrc = 忽略重复的来源 %1$S
# LOCALIZATION NOTE (ignoringNonAsciiToken):
# %1$S defines the name of the directive
# %2$S is the token string containing non-ASCII characters.
ignoringNonAsciiToken = 忽略带有非 ASCII 标记“%2$S”的指令“%1$S”
# LOCALIZATION NOTE (ignoringSrcFromMetaCSP):
# %1$S defines the ignored src
ignoringSrcFromMetaCSP = 忽略源 '%1$S' (通过 meta 元素传递时不支持)。
# LOCALIZATION NOTE (ignoringSrcWithinNonceOrHashDirective):
# %1$S is the ignored src (e.g. "unsafe-inline")
# %2$S is the directive (e.g. "script-src-elem")
ignoringSrcWithinNonceOrHashDirective = 忽略 %2$S 中的 “%1$S”：指定了 nonce-source 或 hash-source
# LOCALIZATION NOTE (ignoringScriptSrcForStrictDynamic):
# %1$S is the ignored src
# %1$S is the directive src (e.g. "script-src-elem")
# 'strict-dynamic' should not be localized
ignoringScriptSrcForStrictDynamic = 忽略 %2$S 中的“%1$S”：指定了“strict-dynamic”
# LOCALIZATION NOTE (ignoringStrictDynamic):
# %1$S is the ignored src
ignoringStrictDynamic = 忽略来源“%1$S”（仅 script-src 内可支持）。 
# LOCALIZATION NOTE (ignoringUnsafeEval):
# %1$S is the csp directive (e.g. script-src-elem)
# 'unsafe-eval' and 'wasm-unsafe-eval' should not be localized
ignoringUnsafeEval = 忽略“%1$S”中的“unsafe-eval”或“wasm-unsafe-eval”。
# LOCALIZATION NOTE (strictDynamicButNoHashOrNonce):
# %1$S is the csp directive that contains 'strict-dynamic'
# 'strict-dynamic' should not be localized
strictDynamicButNoHashOrNonce = “%1$S”内的关键字 ‘strict-dynamic’ 没有有效的随机数或散列，可能阻止加载所有脚本
# LOCALIZATION NOTE (reportURInotHttpsOrHttp2):
# %1$S is the ETLD of the report URI that is not HTTP or HTTPS
reportURInotHttpsOrHttp2 = 报告 URI (%1$S) 应该用 HTTP 或 HTTPS URI。
# LOCALIZATION NOTE (reportURInotInReportOnlyHeader):
# %1$S is the ETLD of the page with the policy
reportURInotInReportOnlyHeader = 此网站 (%1$S) 有一个 Report-Only 策略却没有报告 URI。CSP 将不会阻挡并且无法报告此策略的违反情况。
# LOCALIZATION NOTE (failedToParseUnrecognizedSource):
# %1$S is the CSP Source that could not be parsed
failedToParseUnrecognizedSource = 解析不可识别的资源 %1$S 失败
# LOCALIZATION NOTE (upgradeInsecureRequest):
# %1$S is the URL of the upgraded request; %2$S is the upgraded scheme.
upgradeInsecureRequest = 升级不安全的请求“%1$S”至使用“%2$S”
# LOCALIZATION NOTE (ignoreSrcForDirective):
ignoreSrcForDirective = 根据 '%1$S' 指示忽略 src
# LOCALIZATION NOTE (hostNameMightBeKeyword):
# %1$S is the hostname in question and %2$S is the keyword
hostNameMightBeKeyword = %1$S 被识别为主机名而不是关键词。如果您想将其识别为关键词，应使用'%2$S'（用单引号括起来）。
# LOCALIZATION NOTE (notSupportingDirective):
# directive is not supported (e.g. 'reflected-xss')
notSupportingDirective = 不支持指令“%1$S”。指令和值将被忽略。
# LOCALIZATION NOTE (blockAllMixedContent):
# %1$S is the URL of the blocked resource load.
blockAllMixedContent = 拦截不安全的请求“%1$S”。
# LOCALIZATION NOTE (ignoringDirectiveWithNoValues):
# %1$S is the name of a CSP directive that requires additional values
ignoringDirectiveWithNoValues = 忽略 ‘%1$S‘，因为它未包含任何参数。
# LOCALIZATION NOTE (ignoringReportOnlyDirective):
# %1$S is the directive that is ignored in report-only mode.
ignoringReportOnlyDirective = 在提供有 report-only 策略 ‘%1$S’ 时忽略沙盒指令
# LOCALIZATION NOTE (IgnoringSrcBecauseOfDirective):
# %1$S is the name of the src that is ignored.
# %2$S is the name of the directive that causes the src to be ignored.
IgnoringSrcBecauseOfDirective=因 ‘%2$S’ 指令忽略 ‘%1$S’
# LOCALIZATION NOTE (IgnoringSourceWithinDirective):
# %1$S is the ignored src
# %2$S is the directive  which supports src
IgnoringSourceWithinDirective = 忽略来源“%1$S”（“%2$S”中不支持）。
# LOCALIZATION NOTE (IgnoringSourceWithinDirective):
# %1$S is the ignored src
obsoleteBlockAllMixedContent = 忽略“%1$S”，因升级混合内容显示而导致 block-all-mixed-content 失效。


# CSP Errors:
# LOCALIZATION NOTE (couldntParseInvalidSource):
# %1$S is the source that could not be parsed
couldntParseInvalidSource = 无法解析无效的源 %1$S
# LOCALIZATION NOTE (couldntParseInvalidHost):
# %1$S is the host that's invalid
couldntParseInvalidHost = 不能解析无效的主机 %1$S
# LOCALIZATION NOTE (couldntParsePort):
# %1$S is the string source
couldntParsePort = 不能解析 %1$S 中的端口
# LOCALIZATION NOTE (duplicateDirective):
# %1$S is the name of the duplicate directive
duplicateDirective = 检测到重复的指令 %1$S。除首个指令外所有其他的都将被忽略。
# LOCALIZATION NOTE (couldntParseInvalidSandboxFlag):
# %1$S is the option that could not be understood
couldntParseInvalidSandboxFlag = 无法解析无效的沙盒标识“%1$S”

# LOCALIZATION NOTE (invalidNumberOfTrustedTypesForDirectiveValues):
# %1$S is the number of passed tokens.
invalidNumberOfTrustedTypesForDirectiveValues = 收到“require-trusted-types-for”指令的无效令牌数量：%1$S，需要为 1
# LOCALIZATION NOTE (invalidRequireTrustedTypesForDirectiveValue):
# %1$S is the passed token
invalidRequireTrustedTypesForDirectiveValue = 收到“require-trusted-types-for”指令的无效令牌：%1$S，需要为“script”


# LOCALIZATION NOTE (invalidTrustedTypesExpression):
# %1$S is the passed token
invalidTrustedTypesExpression = 收到“trusted-types”指令的无效令牌：%1$S

# LOCALIZATION NOTE (CSPMessagePrefix):
# Do not translate "Content-Security-Policy", only handle spacing for the colon.
# %S is a console message that is being prefixed here.
CSPMessagePrefix = Content-Security-Policy：%S
