# This Source Code Form is subject to the terms of the Mozilla Public
# License, v. 2.0. If a copy of the MPL was not distributed with this
# file, You can obtain one at http://mozilla.org/MPL/2.0/.

# CSP Warnings:
# LOCALIZATION NOTE (CSPViolation):
# %1$S is the reason why the resource has not been loaded.
CSPViolation = The page's settings blocked the loading of a resource: %1$S
# LOCALIZATION NOTE (CSPViolationWithURI):
# %1$S is the directive that has been violated.
# %2$S is the URI of the resource which violated the directive.
CSPViolationWithURI = The page's settings blocked the loading of a resource at %2$S ("%1$S").
# LOCALIZATION NOTE (CSPROViolation):
# %1$S is the reason why the resource has not been loaded.
CSPROViolation = A violation occurred for a report-only CSP policy ("%1$S"). The behavior was allowed, and a CSP report was sent.
# LOCALIZATION NOTE (CSPROViolationWithURI):
# %1$S is the directive that has been violated.
# %2$S is the URI of the resource which violated the directive.
CSPROViolationWithURI = The page's settings observed the loading of a resource at %2$S ("%1$S"). A CSP report is being sent.
# LOCALIZATION NOTE (triedToSendReport):
# %1$S is the URI we attempted to send a report to.
triedToSendReport = Tried to send report to invalid URI: "%1$S"
# LOCALIZATION NOTE (couldNotParseReportURI):
# %1$S is the report URI that could not be parsed
couldNotParseReportURI = couldn't parse report URI: %1$S
# LOCALIZATION NOTE (couldNotProcessUnknownDirective):
# %1$S is the unknown directive
couldNotProcessUnknownDirective = Couldn't process unknown directive '%1$S'
# LOCALIZATION NOTE (ignoringUnknownOption):
# %1$S is the option that could not be understood
ignoringUnknownOption = Ignoring unknown option %1$S
# LOCALIZATION NOTE (ignoringDuplicateSrc):
# %1$S defines the duplicate src
ignoringDuplicateSrc = Ignoring duplicate source %1$S
# LOCALIZATION NOTE (ignoringSrcFromMetaCSP):
# %1$S defines the ignored src
ignoringSrcFromMetaCSP = Ignoring source '%1$S' (Not supported when delivered via meta element).
# LOCALIZATION NOTE (ignoringSrcWithinNonceOrHashDirective):
# %1$S is the ignored src (e.g. "unsafe-inline")
# %2$S is the directive (e.g. "script-src-elem")
ignoringSrcWithinNonceOrHashDirective = Ignoring “%1$S” within %2$S: nonce-source or hash-source specified
# LOCALIZATION NOTE (ignoringScriptSrcForStrictDynamic):
# %1$S is the ignored src
# %1$S is the directive src (e.g. "script-src-elem")
# 'strict-dynamic' should not be localized
ignoringScriptSrcForStrictDynamic = Ignoring “%1$S” within %2$S: ‘strict-dynamic’ specified
# LOCALIZATION NOTE (ignoringStrictDynamic):
# %1$S is the ignored src
ignoringStrictDynamic = Ignoring source “%1$S” (Only supported within script-src).
# LOCALIZATION NOTE (ignoringUnsafeEval):
# %1$S is the csp directive (e.g. script-src-elem)
# 'unsafe-eval' and 'wasm-unsafe-eval' should not be localized
ignoringUnsafeEval = Ignoring ‘unsafe-eval’ or ‘wasm-unsafe-eval’ inside “%1$S”.
# LOCALIZATION NOTE (strictDynamicButNoHashOrNonce):
# %1$S is the csp directive that contains 'strict-dynamic'
# 'strict-dynamic' should not be localized
strictDynamicButNoHashOrNonce = Keyword ‘strict-dynamic’ within “%1$S” with no valid nonce or hash might block all scripts from loading
# LOCALIZATION NOTE (reportURInotHttpsOrHttp2):
# %1$S is the ETLD of the report URI that is not HTTP or HTTPS
reportURInotHttpsOrHttp2 = The report URI (%1$S) should be an HTTP or HTTPS URI.
# LOCALIZATION NOTE (reportURInotInReportOnlyHeader):
# %1$S is the ETLD of the page with the policy
reportURInotInReportOnlyHeader = This site (%1$S) has a Report-Only policy without a report URI. CSP will not block and cannot report violations of this policy.
# LOCALIZATION NOTE (failedToParseUnrecognizedSource):
# %1$S is the CSP Source that could not be parsed
failedToParseUnrecognizedSource = Failed to parse unrecognized source %1$S
# LOCALIZATION NOTE (upgradeInsecureRequest):
# %1$S is the URL of the upgraded request; %2$S is the upgraded scheme.
upgradeInsecureRequest = Upgrading insecure request '%1$S' to use '%2$S'
# LOCALIZATION NOTE (ignoreSrcForDirective):
ignoreSrcForDirective = Ignoring srcs for directive '%1$S'
# LOCALIZATION NOTE (hostNameMightBeKeyword):
# %1$S is the hostname in question and %2$S is the keyword
hostNameMightBeKeyword = Interpreting %1$S as a hostname, not a keyword. If you intended this to be a keyword, use '%2$S' (wrapped in single quotes).
# LOCALIZATION NOTE (notSupportingDirective):
# directive is not supported (e.g. 'reflected-xss')
notSupportingDirective = Not supporting directive '%1$S'. Directive and values will be ignored.
# LOCALIZATION NOTE (blockAllMixedContent):
# %1$S is the URL of the blocked resource load.
blockAllMixedContent = Blocking insecure request ‘%1$S’.
# LOCALIZATION NOTE (ignoringDirectiveWithNoValues):
# %1$S is the name of a CSP directive that requires additional values
ignoringDirectiveWithNoValues = Ignoring ‘%1$S’ since it does not contain any parameters.
# LOCALIZATION NOTE (ignoringReportOnlyDirective):
# %1$S is the directive that is ignored in report-only mode.
ignoringReportOnlyDirective = Ignoring sandbox directive when delivered in a report-only policy ‘%1$S’
# LOCALIZATION NOTE (IgnoringSrcBecauseOfDirective):
# %1$S is the name of the src that is ignored.
# %2$S is the name of the directive that causes the src to be ignored.
IgnoringSrcBecauseOfDirective=Ignoring ‘%1$S’ because of ‘%2$S’ directive.
# LOCALIZATION NOTE (IgnoringSourceWithinDirective):
# %1$S is the ignored src
# %2$S is the directive  which supports src
IgnoringSourceWithinDirective = Ignoring source “%1$S” (Not supported within ‘%2$S’).


# CSP Errors:
# LOCALIZATION NOTE (couldntParseInvalidSource):
# %1$S is the source that could not be parsed
couldntParseInvalidSource = Couldn't parse invalid source %1$S
# LOCALIZATION NOTE (couldntParseInvalidHost):
# %1$S is the host that's invalid
couldntParseInvalidHost = Couldn't parse invalid host %1$S
# LOCALIZATION NOTE (couldntParsePort):
# %1$S is the string source
couldntParsePort = Couldn't parse port in %1$S
# LOCALIZATION NOTE (duplicateDirective):
# %1$S is the name of the duplicate directive
duplicateDirective = Duplicate %1$S directives detected.  All but the first instance will be ignored.
# LOCALIZATION NOTE (couldntParseInvalidSandboxFlag):
# %1$S is the option that could not be understood
couldntParseInvalidSandboxFlag = Couldn’t parse invalid sandbox flag ‘%1$S’

